3M™ Aqua Pure™ Full Flow Drinking Water System | Model 3MFF100 | 5616318

3M™ Aqua Pure™ Full Flow Drinking Water System, FF100 is designed to connect to your existing primary kitchen or bathroom faucet for full flow filtration. This system reduces chlorine taste and odour (CTO), particulate, lead and Cryptosporidium parvum cysts. It has a built in valve to shut off water when changing filters and uses a sanitary quick-change cartridge designed to eliminate the need to handle filter media during change-out. It is comprised of pleated sub-micron membrane and composite activated carbon block filter. 3M™ Aqua Pure™ Full Flow Drinking Water System, 3MFF100 lets you use your existing kitchen faucet to get filtered water for drinking, cleaning, and cooking.

Large 6,000 gallon capacity requires changing the cartridge approximately once a year, saving you time and money. High flow rate of 2.5 gallons per minute allows the filter system to be used on existing kitchen and/or bathroom faucets. Sanitary Quick Change (SQC) design, an industry first for this application, allows for fast and easy cartridge change-outs without the need of a filter wrench. Maintain useable under sink space as the filter system installs with minimum space requirements.

Microns: 0.2 Nominal Micron Rating

Rated Capacity: 6,000 Gallons

Flow Rate: 2.5 gpm (9.5 lpm)

Filter Life: 12 Months

Filter Type: Quick Change Cartridge

Fitting Size: (Imperial) 0.375 in

Fitting Size: (Metric) 9.525 cm

Fitting Type: NPT

Applications: Commercial & Residential Use

Inlet Outlet Size: 3/8"

Maximum Operating Pressure:(Imperial) 125 psi

Maximum Operating Pressure: (Metric) 862 kPa

Maximum Operating Temperature: (Celsius) 37.8 °C